Dukane 8806 user manual Projector Name, Selecting Communication Speed Communication Speed

6. Using On-Screen Menu

[Projector Name]

Specify a unique projector name. Press to display the software keyboard and type in. Up to 16 alphanumeric characters can be used. After entering a name, select [OK] and press the ENTER button.

Using Software Keyboard

1 to 0 and
Characters	Use to type in password or keyword.
MODE	Selects one of three modes for alphabet and special characters.
SP	Inserts a space
BS	Deletes one character backward
..........................	Returns to the previous
..........................	Advances to the next
OK	Executes the selection
Cancel	Cancels the selection

Selecting Communication Speed [Communication Speed]

This feature sets the baud rate of the PC Control port (D-Sub 9 Pin). It supports data rates from 4800 to 38400 bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equipment, a lower baud rate may be recommended for long cable runs).

Your selected communication speed will not be affected even when [Reset] is done from the menu.

Setting the Current Date and Time [Date, Time Preset]

You can set the current time, month, date, and year.

NOTE: The projector has a built-in clock. The clock will keep working for about 2 weeks after the main power is turned off. If the main power is off for 2 weeks or more, the built-in clock will cease. If the built-in clock ceases, set the date and time again. The built-in clock will not cease while in the standby mode.

Turning On or Off Remote Sensor [Remote Sensor]

This option determines which remote sensor on the projector is enabled in wireless mode. The options are: front, rear or both.

96