Dukane 8806 user manual Attaching Wireless LAN Card, Setting card in PC card slot

4. Attaching Wireless LAN Card

4. Attaching Wireless LAN Card

Insert the wireless LAN card into the PC card slot on the rear panel of the projector.

Important

•The wireless LAN card must be inserted into the PC card slot in the correct direction. It cannot be inserted in the reverse direction. If the card is inserted in the reverse direction with excessive force applied, the pins in the projector and the PC card slot may break. Be sure to insert the wireless LAN card with its label facing up.

•Before touching the LAN card, touch a metallic object (such as a door knob or aluminum window frame) to discharge the static electricity from your body.

•Always insert or remove the wireless LAN card when the main power is turned off. Failure to do so may cause projector

malfunction or damage to wireless LAN card. If the projector will not work correctly, turn off the projector, wait 30 seconds, and turn it back on.

■Setting card in PC card slot

1Press POWER ON/STAND BY button to set the projector to Stand-by mode, press the “O (off)” side of the main power switch of the projector.

4

2With the label on the wireless LAN card facing up, slowly insert the card into the slot horizontally.

Attaching Wireless

S- VIDEO

PC	CARD		USB
COMPONENT		IN
Y
IN	Cb/Pb
	VIDEO IN		Cr/Pr
			MONOAUDIOIN
			L/

3D	REF
		ORM	AUTO
				ADJ
				UST
					SOURCE
						ON
						/STAND	BY	PC	CARD
								LAMP
								STATUS
								POWER
LAN
AUDIO IN				COM	PUTER
			COM		3IN
				PUTER1IN
R
AUDIO		OUT
			MONITOR			COM	PUTER
					OUT			2IN

PC CONTROL

LAN Card

ACIN

Note

Do not apply any excessive force while inserting the card.

11