Sony RM-TP504 Rear panel

Rear panel

7 1 2

Operations Basic and Parts of Location

	3
6	4
	5

1Transmitter/receiver section

Transmits and receives infrared signals to and from the receiver.

2Battery cover

3Touch pen

4?/1/SYSTEM STANDBY button

Normally used to turn the receiver on or off. Can also be used to turn off all Sony components (SYSTEM STANDBY) when this button is set to SYSTEM STANDBY in the SETUP screen (see page 29). Regardless of the setting, when pressed for more than 3 seconds, the SYSTEM STANDBY code is transmitted only once.

5Remote code receiver section

When using the Learning function, this section receives the remote codes from other remote controls.

6Touch pen holder

Pull out and insert touch pen when not in use.

7DC input jack

You can connect an AC power adapter (DC 300 mA minimum, 6V) (not supplied).

10