Sony RM-TP504 Location of, Parts and Basic, Operations, Front panel

Location of

Parts and Basic

Operations

This chapter provides information about the locations and functions of the buttons and controls on this unit. However, some functions in this section may not operate depending on the receiver.

Front panel

1 2 3

4

5

6

7

8

1BACK LIGHT/COMMANDER OFF

Press to turn the backlight on or off. Hold down for about 2 seconds to turn the LCD off. When the LCD is off, press to turn on the LCD and backlight.

•To prolong use of the batteries, the LCD automatically turns off if there are no commands entered in the touch panel for 10 seconds.

•To view the LCD display without turning on the backlight, touch the touch panel when both the backlight and LCD are off.

2Touch panel

Touch to operate. The commander turns on automatically.

3VOL +/– buttons

Use to adjust the volume of the receiver.

4JOG DIAL control

Rotate to scroll through items in a list (etc.). Push to select the highlighted item.

5?/1/SYSTEM STANDBY button

Normally used to turn the receiver on or off. Can also be used to turn off all Sony components (SYSTEM STANDBY) when this button is set to SYSTEM STANDBY in the SETUP screen (see page 29). Regardless of the setting, when pressed for more than 3 seconds, the SYSTEM STANDBY code is transmitted only once.

6MUTING button

Use to mute the sound of the receiver.

7CONTRAST control

Use to adjust the contrast of the LCD.

8SLEEP button

Use to operate the receiver’s sleep function. The sleep settings appear in the receiver’s display, not the commander’s LCD.

Operations Basic and Parts of Location

9