Operation
Adjusting Sound Fields
Set up the SOUND FIELD screen menus to fully enjoy the surround sound created by the sound fields.
On the EQ EDIT screen, adjust the frequency bands of front, center and rear speakers of the equalizer preset (EQ PRESET 1~5) that you selected on the EQ BANK screen. Adjust various aspects of individual sound fields on the SURROUND screen. The settings are stored individually for each sound field.
Adjust the output level of each speaker and perform a variety of other adjustments to control the sound mix on the LEVEL screen.
CUSTOM allows you to customize other operations that the receiver performs. For details on what can be adjusted, refer to the operating instructions supplied with the receiver.
Set speaker configuration, size and distance from the main listening position on the SETUP screen.
Adjusting the frequency bands
1Touch EQ EDIT on the SOUND FIELD screen.
The EQUALIZER screen of the equalizer preset selected in the EQ BANK screen appears.
If EQ OFF is selected in the EQ BANK screen, EQUALIZER screen items are all grayed out, and edit functions cannot be performed.
2Use the JOG DIAL or touch 4 or $to scroll through the list.
3Scroll the JOG DIAL to select an item or touch the item you want to adjust.
Output speaker
BASS: low range
MID: mid range
TREBLE: high range
GAIN: gain adjustment
FREQUENCY: frequency adjustment
RANGE: range adjustment
SLOPE: slope adjustment
The current
EQ BANK number
4Touch 
or 
to adjust to the desired value.
5Repeat steps 2 through 4 when there is more than one item that you wish to adjust.
6Touch EXIT when adjustment is finished.
Notes
•Items that cannot be adjusted due to the current speaker settings or sound field mode are grayed out.
•If the alarm sounds, or all items appear to be grayed out, touch
RELOAD.
20