Other setup
pDisplay the current settings on the monitor (ON SCREEN)
The receiver’s current sound field and SURROUND parameters are displayed on the monitor.
Touch ON SCREEN again to return to the SETUP screen.
pAdjusting the position of the touch panel (LCD)
Adjust the position of the LCD when it shifts from the normal operating position.
1Touch TOUCH PANEL on the SETUP screen.
The TOUCH PANEL ADJUSTMENT screen appears.
2Touch the center of each of the 4 dots.
(For details, see “Touch panel adjustment” on page 6.) “Adjusted” appears in a short while and long beep is emitted.
pSetting the LCD to turn off automatically
The LCD backlight can be set to turn off automatically after operation.
1Touch AUTO OFF TIME on the SETUP screen .
The AUTO OFF TIME screen appears.
2Touch + or – or scroll the JOG DIAL to set the desired turn off time.
The turn off time can be set between 10 and 30 seconds in 1 second intervals.
3Touch to EXIT.
zTo preserve battery life
The turn off time is factory set to 10 seconds. Select a short turn off time in step 2.
pChanging the function of the POWER button SYSTEM STANDBY: Switches power of all Sony AV
components off.
POWER ON/OFF: Switches only the receiver on or off. However, when pressed for more than 3 seconds, the SYSTEM STANDBY code is output.
pSetting the operation beep sound on or off
A beep can be set to sound or not sound when the touch panel is touched.
Touch ON (sound) or OFF (no sound) in BEEP: ON OFF in the SETUP screen.
pSetting the warning alarm on or off
A warning alarm can be set to sound or not sound when a communication error has occurred.
Touch ON (sound) or OFF (no sound) in ALARM: ON OFF in the SETUP screen.
pReturning settings to their factory preset settings
Use this function to erase all memorized settings and return them to their factory presets.
Please note that once erased, settings cannot be returned.
When carrying out this operation, make sure that the receiver’s power is on, and be sure to point the commander’s transmitter/ receiver section toward the display on the receiver.
1Touch ALL CLEAR on the SETUP screen.
2Touch YES.
p CONTROL A1/A1 auto function (AUTO FUNC) ON: When a component connected via a CONTROL
A1/A1 cord is played, the power to this unit is turned on and the function selector is automatically set for that component.
OFF: When you do not want linked control of connected components, select [OFF].
When AUTO FUNC does not appear in the display, use the JOG DIAL to scroll the screen until AUTO FUNC appears.
Operation
29