Adjusting the Commander’s Operating Environment
6Select the MAKER.
Select the maker from the maker list.
The COMMAND list appears according to the maker you selected.
Setting the function name
1Touch SETUP.
The SETUP screen appears.
Operation
7Select the COMMAND.
Select the command you want to register.
The items selected in step 5 to 7 are registered in the box selected in step 4.
The BOX Number list reappears.
zTo clear the programmed MACRO
Select the BOX Number of the MACRO you want to clear in step
4.Select “MACRO CLEAR” in the CATEGORY in step 5. The items of the BOX are cleared.
zTo set “WAIT TIME”
Select the BOX Number of the MACRO you want to set the wait time for in step 4. Select “WAIT TIME” in the CATEGORY in step 5.
The wait time list (1 to 10 second in 1 second increments) appears. Select the time you want to delay. After you selected, the BOX Number list reappears.
If you press ALL CLEAR on the SETUP screen, all the registered MACRO programs are cleared.
zMACRO 1 has been factory set
MACRO 1 has been factory set to power code of Sony Audio Visual component.
2Touch FUNC NAME.
The FUNCTION NAME EDIT screen appears.
If FUNC NAME does not appear in the display, use the JOG DIAL to scroll the screen until FUNC NAME appears.
Touching 4 moves list up
Touching $ moves list down
3Touch the function that you want to edit.
26