4Touch NAME EDIT.
The NAME EDIT screen appears.
Current name display
Name input display
Name input buttons
Touch to upload the name to the receiver.
Touch to set the name to the commander.
Setting remote control codes that are not
stored in the commander
When a remote control code is not one of the presets stored in the commander, it is possible for the commander to learn the code using the Learning function. For details on how to use the learned codes, please see page 17.
1Touch SETUP.
The SETUP screen appears.
Operation
5Enter the name.
After the name has been entered, touch SET. The new function name is set in the commander.
After the name has been entered, point the commander toward the receiver and touch UPLOAD. The new function name is set in the receiver.
2Touch LEARNING.
Learning area
Code set mark
Box number assigned for new code
3Touch the area corresponding to where you want the new code to be learned. Any letter from A to J can be selected (for example, select “A”).
4Touch the Box Number where you want to save the new code (for example, select “A6”).
The LEARNING SETUP screen is displayed.
Box number assigned for new code
Message window
Command button
Name input button
5Touch “Learning Start”.
“Please Send Signal” is displayed.
27