qa Other menus (page 14)

Set the following menu

R E S E T

xResetting the adjustments

You can reset the adjustments using the RESET menu. See

O K

items.C A N C E L

• RESET 0

• MENU LOCK

1 2 8 0 x 1 0 2 4 / 6 0 H z

E X I T

xUsing the MENU, m/M, and OK buttons

1Display the main menu.

Press the MENU button to display the main menu on your screen.

MENU

2Select the menu you want to adjust.

Press the m/M buttons to display the desired menu. Press the OK button to select the menu item.

OK / INPUT

,

3Adjust the menu.

Press the m/M buttons to make the adjustment, then press the OK button.

When you press the OK button, the setting is stored, then the display returns to the previous menu.

OK / INPUT

,

4Close the menu.

Press the MENU button once to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 45 seconds.

MENU

page 14 for more information on resetting the adjustments.

xControlling the monitor by computer

Press the MENU button down for at least 5 seconds. You will see an on-screen message indicating the current setting. After 3 seconds the DDC/CI setting is switched on or off, as shown below.

On-screen messages (Appear for a while)

DDC-CI : ON

Allows the computer to control

(default setting)

menu settings.

 

 

DDC-CI : OFF

Does not allow the computer to

 

control menu settings.

 

 

Note

This function applies only to computers that support the DDC/CI (Display Data Channel Command Interface) function.

Adjusting the backlight(BACKLIGHT)

If the screen is too bright, adjust the backlight and make the screen easier to see.

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M buttons to select (BACKLIGHT) and press the OK button.

The BACKLIGHT menu appears on the screen.

3Press the m/M buttons to adjust the light level and press the OK button.

Adjusting the contrast (CONTRAST)

Adjust the picture contrast.

Note

While COLOR is set to sRGB, you cannot adjust CONTRAST, BRIGHTNESS or GAMMA.

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M buttons to select 6 (CONTRAST) and press the OK button.

The CONTRAST menu appears on the screen.

3Press the m/M buttons to adjust the contrast and press the OK button.

10 (GB)