Identifying parts and controls

See the pages in parentheses for further details.

The 1 (power) switch and the control buttons are on the lower right part of the front of the monitor.

Front of the displayRear of the display

7

6

8

 

5

11 (Power) switch and indicator (pages 7, 16)

To turn the display on or off, press the 1 (power) switch. The power indicator lights up in green when the display is turned on, and lights up in orange when the monitor is in power saving mode.

Press to turn the display on or off.

2MENU button (pages 9, 10)

This button displays or closes the main menu.

You can also switch on the DDC/CI function by keeping this button pressed for more than 8 seconds.

3m/M buttons (page 10)

These buttons function as the m/M buttons when selecting the menu items and making adjustments.

4OK button (page 10)

This button selects the item or executes the settings in the menu.

INPUT button (page 8) (SDM-E76D/SDM-E96D only)

This button switches the video input signal between INPUT1 and INPUT2 when two computers are connected to the monitor.

5Security Lock Hole

The security lock hole should be applied with the Kensington Micro Saver Security System.

Micro Saver Security System is a trademark of Kensington.

6AC IN connector (page 7)

Connect the power cord (supplied).

7DVI-D input connector (digital RGB) for INPUT1 (page 6) (SDM-E76D/SDM-E96D only)

This connector inputs digital RGB video signals that comply with DVI Rev.1.0.

8HD15 input connector (analog RGB) (page 6)

This connector inputs analog RGB video signals (0.7 Vp-p, positive) and SYNC signals.

5 (GB)