Adjusting the tilt

This display can be adjusted within the angles shown below.

Approx. 5°–25°

Grasp the lower sides of the LCD panel, then adjust screen tilt.

To use the display comfortably

This display is designed so that you can set it up at a comfortable viewing angle. Adjust the viewing angle of your display according to the height of the desk and chair, and so that light is not reflected from the screen to your eyes.

Note

When adjusting the screen tilt, make sure not to knock or drop the display off the desk.

Selecting the input signal

(INPUT button) (SDM-E76D/SDM-E96D only)

Press the INPUT button.

The input signal change each time you press this button.

OK / INPUT

On-screen message

Input signal configuration

(Appears about 5 seconds on

 

the upper left corner.)

 

 

 

INPUT1 : DVI-D

DVI-D input connector

 

(digital RGB) for INPUT1

 

 

INPUT2 : HD15

HD15 input connector

 

(analog RGB) for INPUT2

 

 

8 (GB)