8Press the m/M buttons until the vertical stripes disappear.
Adjust so that the vertical stripes disappear.
9Press the OK button.
The main menu appears on the screen.
If horizontal stripes are observed over the entire screen, adjust the PHASE using the following procedures.
10Click "Next".
Test pattern for PHASE appears.
11Press the m/M buttons to select PHASE and press the OK button.
The PHASE adjustment menu appears on the screen.
12Press the m/M buttons until the horizontal stripes are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
13Press the OK button.
The main menu appears on the screen.
14Click "Next".
Test pattern for CENTER appears.
15Press the m/M buttons to select H CENTER or V
CENTER and press the OK button.
The H CENTER adjustment menu or V CENTER adjustment menu appears on the screen.
16Press the m/M buttons to center the test pattern on the screen.
17Click "Next".
Click "End" or "EXIT" to turn off the test pattern.
When Auto run fails to operate:
1Open “My Computer” and right click the
Go to “Explorer” and open the
2Open [Utility] and then select [WINDOWS].
3Start [WIN_UTILITY.EXE].
Test pattern appears. Go to step 4.
For Macintosh User
1Open the
2Open [Utility] and then select [MAC].
3Open [MAC UTILITY] and then start
[MAC_CLASSIC_UTILITY] or [MAC_OSX_UTILITY].
Test pattern appears. Go to step 4.
4Press the MENU button.
The main menu appears on the screen.
5Press the m/M buttons to select 
(SCREEN) and press the OK button.
The SCREEN menu appears on the screen.
6Press the m/M buttons to select PHASE and press the OK button.
The PHASE adjustment menu appears on the screen.
7Press the m/M buttons until the horizontal stripes are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
8Press the OK button.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust the PITCH using the following procedures.
9Press the m/M buttons to select PITCH and press the
OK button.
The PITCH adjustment menu appears on the screen.
10Press the m/M buttons until the vertical stripes disappear.
Adjust so that the vertical stripes disappear.
11Press the OK button.
The main menu appears on the screen.
12Press the m/M buttons to select H CENTER or V
CENTER and press the OK button.
The H CENTER adjustment menu or V CENTER adjustment menu appears on the screen.
13Press the m/M buttons to center the test pattern on the screen.
14Click “END” on the screen to turn off the test pattern.
12 (GB)