Adjusting the black level of an image (BRIGHTNESS)

Adjust the picture brightness (black level).

Note

While COLOR is set to sRGB, you cannot adjust CONTRAST, BRIGHTNESS or GAMMA.

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M buttons to select 8 (BRIGHTNESS) and press the OK button.

The BRIGHTNESS menu appears on the screen.

3Press the m/M buttons to adjust the brightness and press the OK button.

Adjusting the picture’s sharpness and centering (SCREEN)(analog RGB signal only)xAutomatic picture quality adjustment function

When the monitor receives an input signal, it automatically adjusts the picture’s position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen (page 16).

Notes

•While the automatic picture quality adjustment function is activated, only the 1 (power) switch will operate.

•The picture may flicker during this time, but this is not a malfunction. Simply wait a few moments until the adjustment completes.

If the automatic picture quality adjustment function of this monitor seems to not completely adjust the picture

You can make further automatic adjustment of the picture quality for the current input signal. (See AUTO ADJUST below.)

If you still need to make further adjustments to the picture quality

You can manually adjust the picture’s sharpness (phase/pitch) and position (horizontal/vertical position).

These adjustments are stored in memory and automatically recalled when the display receives the same input signal. These settings may have to be repeated if you change the input signal after reconnecting your computer.

xMake further automatic adjustments to the picture quality for the current input signal

(AUTO ADJUST)

Set the optimum phase, pitch and horizontal/vertical position for the current input signal.

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M buttons to select (SCREEN) and press the OK button.

The SCREEN menu appears on the screen.

3Press the m/M buttons to select AUTO ADJUST and press the OK button.

The AUTO ADJUST menu appears on the screen.

4Press the m/M buttons to select ON or OFF and press the OK button.

•ON: Make the appropriate adjustments of the screen's phase, pitch and horizontal/vertical position for the current input signal and store them.

Note

When the monitor is turned on or the input signal is changed, AUTO ADJUST makes the automatic adjustments.

•OFF: AUTO ADJUST is not available.

Note

AUTO ADJUST works automatically when the input signal is changed.

5Press the m/M buttons to select and press the

OK button.

Return to the menu screen.

xAdjust the picture’s sharpness and position manually (PITCH/PHASE/H CENTER/V CENTER)

You can adjust the picture’s sharpness as follows. This adjustment is effective when the computer is connected to the monitor’s HD15 input connector (analog RGB).

1Set the resolution to 1280 ⋅ 1024 on the computer.

2Load the CD-ROM.

3Start the CD-ROM For Windows User When Auto run operates:

Select the area, language and model, and click DISPLAY ADJUSTMENT TOOL (UTILITY).

4Click “Adjust” and confirm the current resolution (top value) and recommended resolution (bottom value), and then click “Next”.

Test pattern for PITCH appears.

5Press the MENU button.

The main menu appears on the screen.

6Press the m/M buttons to select (SCREEN) and press the OK button.

The SCREEN menu appears on the screen.

7Press the m/M buttons to select PITCH and press the

OK button.

The PITCH adjustment menu appears on the screen.

11 (GB)