Setup

Before using your monitor, check that the following items are included in your carton:

•LCD display

•Power cord

•HD15-HD15 video signal cable (analog RGB)

•DVI-D video signal cable (digital RGB) (SDM-E76D/SDM-E96D only)

•Cord strap

•CD-ROM (utility software for Windows/Macintosh, Operating Instructions, etc.)

•Warranty card

•Quick Setup Guide

Step 1:Use the standxUse the supplied stand

Open the stand.

Note

The stand is folded at the factory. Be sure not to place the display vertically with the stand as it is. Otherwise, the display may topple over.

xUse the VESA compatible stand

When using a non-supplied VESA compatible mounting arm or stand, use the VESA compatible screws to attach.

screw positions of VESA compatible stand

75 mm ⋅ 75 mm

You can use the display with or without the supplied stand.

Step 2:Connect the display to your computer

Turn off the monitor and computer before connecting.

Notes

•Do not touch the pins of the video signal cable connector as this might bend the pins.

•Check the alignment of the HD15 connector to prevent bending the pins of the video signal cable connector.

xConnect a computer equipped with a DVI output connector (digital RGB)(SDM-E76D/SDM-E96D only)

Using the supplied DVI-D video signal cable (digital RGB), connect the computer to the monitor’s DVI-D input connector (digital RGB)

to the DVI-D input connector (digital RGB)

to the computer’s DVI output

DVI-D video signal

cable (digital RGB)

connector (digital RGB)

(supplied)

 

xConnect a computer equipped with an HD15output connector (analog RGB)

Using the supplied HD15-HD15 video signal cable (analog RGB), connect the computer to the monitor’s HD15 input connector (analog RGB).

to the HD 15 input connector (analog RGB)

 

 

 

 

 

 

 

HD15-HD15 video signal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to the computer’s HD15 output

cable (analog RGB)

connector (analog RGB)

(supplied)

6 (GB)