5 If necessary, fine tune the color temperature.
First touch theM(+)/m – keys to select ADJUST and touch the OK key. Next touch the M(+)/m – keys to select R (Red) or B (Blue) and touch the OK key. Then touch the M(+)/m – keys to adjust the color temperature and touch the OK key.
Since this adjustment changes the color temperature by increasing or decreasing the R and B components with respect to G (green), the G component is fixed.
4 Touch the M(+)/m – keys to select the desired color temperature and touch the OK key.
The preset color temperatures are 5000K, 6500K, and 9300K.
GB
Since the default setting is 9300K, the whites will change from a bluish hue to a reddish hue as the temperature is lowered to 6500K and 5000K.
You can set the color temperatures for INPUT1, INPUT2 (analog RGB), and INPUT2 (digital RGB), respectively.
10Touch the M(+)/m – keys until the horizontal stripes are at a minimum.Adjust so that the horizontal stripes are at a minimum.11Click [END] on the screen to turn off the test pattern.

To reset the automatic picture quality adjustment

Select SCREEN RESET and activate it using the RESET menu. For more information on using the RESET menu, see“Resetting the adjustments

(RESET)” on page 17.

Adjusting the color temperature (COLOR)

The COLOR settings allow you to adjust the picture’s color temperature by changing the color level of the white color field. Colors appear reddish if the temperature is low, and bluish if the temperature is high.

You can set the color temperature to 5000K, 6500K, 9300K or user adjustment.1Light up the characters and icons to indicate the functions of the keys.

Touch any one of the MENU, M(+)/m –),8 (brightness),6 (contrast), orINPUTkeystolightupthe indicating the functions of the keys.

Note

When using digital RGB signals, you do not need to set the PHASE or

PITCH.

Adjusting the picture position

(H CENTER/V CENTER) (Analog RGB signals only)

2Touch the MENU key.

The main menu appears on the screen.

3Touch theM(+)/m – keys to select (COLOR) and touch the OK key.The COLOR menu appears on the screen.

If the picture is not in the center of the screen, adjust the picture’s centering as follows.

These settings may have to be repeated if you change the input signal after reconnecting your computer.

1Start the Utility Disk and display the test pattern. Repeat steps 2 to 4 of “Eliminating flicker or blurring (PHASE/PITCH) (Analog RGB signals only).”

2Touch the MENU key.The main menu appears on the screen.3Touch the M(+)/m – keys to select (H CENTER)or (V CENTER) and touch the OK key.The H CENTER or V CENTER menu appears on the screen.

4Move the picture up, down, left, or right until the frame at the perimeter of the test pattern disappears.

Touch the M(+)/m – keys to adjust the picture’s centering using the H CENTER menu for horizontal adjustment, or the V CENTER menu for vertical adjustment.

USE R AD J USTMENT

R

1 6 2

G1 7 0

B 2 0 5

EX I T

5Click [END] on the screen to turn off the test pattern.

Note

When using digital RGB signals, you do not need to set the H CENTER or V CENTER.

If you fine tune the color temperature, the new color setting is stored in memory for USER ADJUSTMENT and automatically recalled whenever USER is selected.

You can set the USER ADJUSTMENT for INPUT1, INPUT2 (analog RGB), and INPUT2 (digital RGB), respectively.

15