1 Grasp the middle part of the bottom of the display while holding the display stand, then, tilt the LCD panel sufficiently backward.
Adjusting the tilt and heightThis display can be adjusted within the angles shown below.

30°

59°

2Grasp the lower sides of the LCD panel, then pull down the panel to adjust screen height.

29°29° A

3 Grasp the middle part of the top and bottom of the

60°

LCD panel, then adjust screen tilt.

 

60°

 

GB

Notes

Note

When you connect cables to the USB downstream connectors, the right

 

side rotation angle may be narrower than 60 degrees.

When adjusting the screen tilt and height, proceed slowly and carefully,

Be careful not to get your fingers caught between the arm and the base

being sure not to hit the LCD panel against the desk or the base of the

of the stand – Aontheillustrationabovedisplay.stand.

To use the display comfortablyToadjusttheangles,followtheprocedurebelow.

This display is designed so that you can set it up at a comfortable viewing angle. Adjust the viewing angle of your display according to the height of the desk and chair, and so that light is not reflected from the screen to your eyes.

Note

Do not grasp the portion around the protrusion on the center of the bottom of the display. Otherwise, the display may catch your fingers.

11