Automatic brightness adjustment function (light sensor)

This monitor is provided with a feature to automatically adjust thesnsor setting is set to ON, the monitor adjusts the brightness of screen brightness according to the brightness of the surroundingsthebacklight. linearly from its lower- to upper-limit values. When The brightness of the backlight is set to the most appropriate levelthe user adjusts the backlight, the backlight brightness is

by setting the light sensor to ON. The default setting of the automatically adjusted between the user adjustment value and the brightness of the backlight is set to its maximum. When the lightupper- and lower-limit values.

Backlight brightness

Automatic brightness adjustment

after user adjustment

Maximum

User adjustment value

Preset automatic adjustment

Minimum

Brightness during

Brightness of surroundings

user adjustment

 

 

User-specified

 

brightness value

GB

Automatic picture quality adjustment function (Analog RGB signals only)

When the monitor receives an input signal, the automatic picture quality adjustment function of this monitor adjusts the picture position, phase, and pitch to provide a high quality picture at the center of the screen.

Additionally, several factory preset modes are stored in the monitor’s memory as recommended adjustment data. (See the Appendix for a list of the factory preset modes.)

Even when a signal that matches one of the factory preset modes is input, if it is input for the first time, the automatic picture quality adjustment function works to optimize the picture quality according to the type of devices connected.

Also, when a signal that does not match any of the preset modes is input for the first time, the function works and ensures that a clear picture appears on the screen for any timing within the monitor’s frequency range (horizontal: 28 – 92 kHz, vertical: 48

– 85 Hz).

Notes

•The automatic picture quality adjustment function may not work properly depending on the type of signal input.

•For any signal input for the first time, the automatic picture quality adjustment function works and the monitor will take a longer time than normal for displaying the picture.

•While the automatic picture quality adjustment function is activated, only the 1 (power) switch will operate.

•While the automatic picture quality adjustment function is activated, AUTO ADJUSTING appears on the screen.

21