Troubleshooting

Before contacting technical support, refer to this section.

If PLEASE CHANGE TO SXGA appears on the screen

This indicates that the resolution of the input signal exceeds 1280⋅ 1024 (ΣΞΓΑ). Σετ ψουρ χο∝πυτερ το ουτπυτ α σιγναλ 1280 ⋅ 1024.

On-screen messages

If there is something wrong with the input signal, one of the following messages appears on the screen. To solve the problem, see“Trouble symptoms and remedies” on page 23.

I NFORMA T I ON

RESOL UT I ON > SXGA

P L EASE CHANGE TO SXGA

If OUT OF SCAN RANGE appears on the screenΙφ ΧΑΒΛΕ ΔΙΣΧΟΝΝΕΧΤΕΔ αππεαρσ ον τηε σχρεεν

This indicates that the input signal is not supported by the

Τηισ ινδιχατεσ τηατ τηε ϖιδεο σιγναλ χαβλε ηασ βεεν

monitor’s specifications. Check the following items.

δισχοννεχτεδ φρο∝ τηε χυρρεντλψ σελεχτεδ χοννεχτορ.

 

I NFORMA T I ON

OUT OF SCAN RANGE

x x x . x k H z / x x H z

If “xxx.x kHz / xx Hz” is displayed

This indicates that either the horizontal or vertical frequency is not supported by the monitor’s specifications.

The figures indicate the horizontal and vertical frequencies of the current input signal.

If “RESOLUTION > UXGA” is displayedThis indicates that the resolution is not supported by the

monitor’s specifications.

If NO INPUT SIGNAL appears on the screen

This indicates that no signal is being input from the currently selected connector.

I NFORMA T I ON

NO

I NPUT S I GNA L

I NPUT : 1

GO

TO POWER SAVE

INPUT:

This indicates the currently selected connector (INPUT: 1 or

INPUT: 2).

If “GO TO POWER SAVE” is displayed

When the POWER SAVE menu is set to ON, the monitor enters the power saving mode after about 4 seconds from the time the message is displayed.

If “USB CONNECTED” is displayed

This indicates that a computer whose power is on is connected to the USB upstream connector on the monitor. For that reason, the monitor will not enter the power saving mode even if the POWER SAVE menu is set to ON.

I NFORMA T I ON

CAB L E D I SCONNECT ED

I NPUT : 1

GO TO POWER SAVE

ΙΝΠΥΤ:

Τηισ ινδιχατεσ τηε χυρρεντλψ σελεχτεδ χοννεχτορ (ΙΝΠΥΤ: 1 ορ

ΙΝΠΥΤ: 2).

Ιφ“GO TO POWER SAVE” is displayed

When the POWER SAVE menu is set to ON, the monitor enters the power saving mode after about 4 seconds from the time the message is displayed.

If “USB CONNECTED” is displayed

This indicates that a computer whose power is on is connected to the USB upstream connector on the monitor. For that reason, the monitor will not enter the power saving mode even if the POWER SAVE menu is set to ON.

22