Activating the remote card
To activate the battery for the remote card, remove the plastic slip by pulling the tab.
Replacing the remote card battery
1 | To replace the worn battery with a new | |
| one, remove the battery compartment | |
| from the remote card by pressing the | |
| lock latch to the right, then pull out the | |
| compartment. | |
2 | Be sure that the positive terminal (+) of | |
| the CR2025 lithium battery is facing | |
| upward. | |
3 | Close the battery compartment to with a | |
1 | gentle push until you hear the click. | |
The worn battery should be disposed | ||
2 |
properly. Check with your local regulations.
✍Handle the remote card with care. Do not try to bend it, drop it or get it wet. Avoid placing it near a heater, in direct sunlight, or where humidity is high.
Caution: Keep the batteries away from the reach of young children. Batteries may pose a potential health hazard if put in their mouth (i.e., they may swallow it or choke on it).
- 9 -