Sony SDM-V72W Specifications

Specifications

LCD panel	Panel type: a-Si TFT Active Matrix
	Display size: 17.1 inch (diagonally)
Display Resolution	Horizontal: Max. 1280 dot
	Vertical: Max. 768 lines
Input signal	RGB operating frequency*
format	Horizontal: 28-70 kHz
	Vertical: 48-85 Hz
	Pixel clock: 94.5 MHz max.

Audio Inputs	500 mVrms (100% modulation)
	Impedance 47k		Ω
Power Requirements	Monitor:
	16.5 V	3.0 A
	Adapter:
	Input: 100–240 V~, 50/60 Hz, 1.5 A
	Output: 16.5 V			3.03 A
Power Consumption	Max. 49 W

■ Horizontal sync width duty should be more

than 4.8% of total horizontal time or 0.8µs,

whichever is larger.

■ Horizontal blanking width should be more than

2.5µsec.

■ Vertical blanking width should be more than

450µsec.

■ Maximum video pixel clock should be less than

PC Input signal levels

Analog RGB video signal: 0.7 Vp-p, 75 Ω , positive

SYNC signal:

TTL level, 2.2k Ω , positive or negative

(Separate horizontal and vertical, or composite sync)

0.3 Vp-p, 75 Ω , negative (Sync on green)

	(including AC adapter)
Operating	5 –35 C°
Temperature
Display dimensions	Upright with stand:
(w x h x d)	Approx. 472 x 405 x 184 mm
	(18.6 x 15.9 x 7.2 inches)
	Upright without stand:
	Approx. 472 x 348 x 70 mm

94.5 MHz.

Design and specifications are subject to change without notice.

Component	Y: 1 Vp-p, 75 Ω , 0.3 V
Video IN 2/RGB IN	negative sync	Ω
	Pb: 0.7 Vp-p, 75
	Pr: 0.7 Vp-p, 75	Ω
Video IN	S-Video In (4-pin mini DIN):
	Y: 1 Vp-p, 75 Ω unbalanced, sync
	negative
	C: 0.286 Vp-p, 75 Ω
	Composite Video (pin jack):
	1 Vp-p 75 Ω unbalanced,
	sync negative
Audio Output	Speaker output: 3W x 2
	Headphone jack: Stereo minijack
	Impedance 16-48 Ω acceptable

	(18.6 x 13.7 x 2.8 inches)
Mass	With stand:
	Approx. 5.9 kg (13 lbs)
	Without stand:
	Approx. 5.1 kg (11.2 lbs)
Plug & Play	DDC2B
Accessories	See page 8

*Recommended horizontal and vertical timing condition

- 40 -