POWER
MENU
DK
WIDE
INPUT
Using the display’s speakers or headphones, you can listen to sound from your computer or other audio equipment connected to the display’s audio input jacks.
You can control the volume by using + /- buttons located at the right side of the display or on the remote card. When either button is pressed volume status will appear on your display screen.
1Press the +/- buttons to display volume status.
2Press the +/- buttons to control the volume.
The volume status will automatically disappear after about 3 seconds.
Use the MUTE button to mute the sound. Press MUTE again or + Volume button on the remote card to restore the sound.
By connecting your headphones to the display’s headphone jack, you can listen to sound from your computer or other audio equipment connected to the display’s audio input jacks.
Be sure to remove the headphones before moving away from the display. If the headphone cord is pulled away from the display abruptly, injury or damage may occur.
✍While displaying the main menu on the screen, use the +/- Volume buttons on the remote card to adjust the volume. The +/- Volume buttons on the side of the display become selection buttons when the main menu is displayed.
When your display is in power save mode (in PC mode), no sound comes from the speakers or the headphones.
- 33 -