Symptom

Check these items

 

 

Picture is ghosting

■ Eliminate the use of video cable extensions and/or video switch boxes.

 

■ Check that all plugs are firmly seated in their sockets.

Picture is not centered or sized properly

■Adjust the pitch and phase (analog RGB signal only) (page 23).

■Adjust the picture position (analog RGB signal only) (page 23). Note that some video modes do not fill the screen to the edges.

Picture is too small■ Set the zoom setting to Full (pages 22 and 30).

Problem caused by a connected

computer or other equipment, and ■ Set the resolution to the screen resolution. not caused by the display

Picture is dark

■

Adjust the brightness (pages 20 and 26).

 

■

Adjust the backlight (pages 20 and 26).

Wavy or elliptical pattern (moire) ■ Adjust the pitch and phase (analog RGB signal only) (page 23). is visible

Color is not uniform

■ Adjust the pitch and phase (analog RGB signal only) (page 23).

 

 

White does not look white

■ Adjust the color temperature (pages 20 and 26).

 

 

The display turns off after a

■ Try pressing a key on the keyboard to exit from Power Save mode.

while

 

 

 

- 37 -