Technical Features

Power save function

This display meets the Power Save guidelines set by VESA, ENERGY STAR, and NUTEK. If the display is connected to a computer or video graphics board that is DPMS (Display Power Management Signaling) compliant, the display will automatically reduce power consumption as shown.

Power

Power

Power

Mode

Consumption

indicator

 

 

 

Normal Operation

49 W (max.)

Green

 

 

 

Active Off *

3 W (max.)

Amber

 

< 2 W (typ.)

 

 

 

 

Remote Off

3 W (max.)

Red

 

< 2 W (typ.)

 

 

 

 

Power Off

3 W (max.)

Off

 

< 1 W (typ.)

 

 

 

 

*When your computer enters “Active Off” Power Mode, the picture disappears from the screen and “No Input Signal” appears. After 5 seconds, the display enters power save mode.

Preset and user modes

When the display receives an input signal, it automatically matches the signal to one of the factory preset modes stored in the display’s memory to provide a high quality picture at the center of the screen. (See appendix on pages 41 and 42 for a list of the factory preset modes.)

For input signals that do not match one of the factory preset modes, the automatic picture quality adjustment function of this display automatically adjusts the picture position, phase, and pitch to ensure that a clear picture appears on the screen for any timing within the display’s clock speed range.

Horizontal frequency

28

- 70 kHz

Vertical frequency

48

- 85 Hz

 

 

Resolution

1280 x 768/60 Hz or less

 

 

Pixel clock

94.5 MHz max.

 

 

 

Consequently, the first time the display receives input signals that do not match one of the factory preset modes, the display may take a longer time than normal to display the picture on the screen. This adjustment data is automatically stored in memory so that next time, the display will function in the same way as when the display receives the signals that match one of the factory preset modes.

- 32 -

In all modes mentioned previously, if the picture is adjusted, the adjustment data is stored as a user mode and automatically recalled whenever the same input signal is received.