Setup 2 Connecting your display to your computer

Turn off the display and computer before connecting. Do not touch the pins of the video signal cable connector as this might bend the pins.

1 Remove the back panel by holding top with one hand as in the illustration then snap out the buttons located at each corner.

1

2

2 Remove the cable cover by lightly pulling

 

top concave portion.

 

 

■ Connecting to an IBM PC/AT or compatible computer

Connecting to an IBM PC/AT

Connecting a Macintosh

Using the HD15/D-sub cable (supplied), connect the computer to the display’s HD15 input connector.

Be sure to check the alignment of the HD15/ D-sub cable. Do not force the connector in the wrong way or the pins might bend.

■Connecting a Macintosh

When connecting a Macintosh computer, use an adapter (not supplied) if necessary. Connect the adapter to the computer before connecting the video signal cable.

- 10 -