POWER
✍The remote card POWER button will only turn your display on from remote off mode, indicated by red power LED indicator. When the display is in power OFF mode, indicated by unlit power LED, the POWER button on the right side of the display must be used to power ON, indicated by green power LED indicator.
1Press the POWER button on the right side of the display.
The power LED indicator lights up in green.
2Turn on the computer or your video source equipment.
Press the INPUT button on the right side of the display repeatedly to select the desired input signal. Or with your remote card select and press the desired input signal.
Pressing the POWER button on the remote card while the power LED indicator is green will turn the power LED to red. A red power LED indicates the display is in remote off.
For more information, see INPUT button on page 5 and Remote card on page 18.
✍The POWER button on the side of the display must initially be pressed (to have unlit LED turned on) to operate with the remote card.
The display complies with the “DDC” Plug
&Play standard and automatically detects all the display’s information. No specific driver needs to be installed to the computer to operate.
The first time you turn on your computer after connecting the display, the setup Wizard may appear on the screen. In this case, follow the
Note: Not all video graphic cards will support 1280 x 768 wide aspect resolution. Use with some devices may require updated drivers. Please consult your video graphic manufacturer for updated drivers.
If no picture appears on your screen
- 16 -