Projecting
This section describes how to operate the projector to view the picture from the equipment connected to the projector. It also describes how to adjust the quality of the picture to suit your taste.
Projecting | Projecting the | |
Picture on the | ||
| ||
| Screen |
1 | Plug the AC power cord into a |
| wall outlet. |
| The ON/STANDBY indicator lights in red and |
| the projector goes into standby mode. |
| ON/ |
| STANDBY |
| Lights in red. |
2 | Press the @/1 (on/standby) |
| switch to turn on the projector. |
| The ON/STANDBY indicator lights in green. |
| ON/ |
| STANDBY |
| Lights in green. |
To view the picture | Press |
| Sound is |
from | INPUT to | heard from the | |
| display |
| equipment |
|
|
| connected to |
Video equipment | VIDEO 1 |
| AUDIO INPUT |
connected to VIDEO |
|
|
|
INPUT on the projector |
|
|
|
Video equipment | AUDIO INPUT | ||
connected to S VIDEO |
|
|
|
INPUT on the projector |
|
|
|
RGB/component | INPUT A | * | PJ MULTI |
| |||
equipment connected to |
|
| INPUT |
PJ MULTI INPUT via |
|
|
|
the optional signal |
|
|
|
interface cable or the |
|
|
|
interface unit |
|
|
|
Video equipment | VIDEO 2 |
| PJ MULTI |
connected to PJ MULTI |
|
| INPUT |
INPUT via the optional |
|
|
|
signal interface cable or |
|
|
|
the interface unit |
|
|
|
6 | Move the focus lever to adjust |
| the focus. |
| Adjust to obtain sharp focus. |
| Focus lever |
7 | Press VOLUME + or – to adjust |
| the volume. |
Projecting
|
|
| 2 | 3 | Turn on the equipment |
SIDE | VOLUME |
| 4 |
| connected to the projector. |
SHOT |
|
|
|
| |
+ | + | INPUT |
|
| Refer to the operating instructions of the |
|
| MS SLIDE |
|
| |
– | – |
|
| connected equipment. | |
| 7 |
| |||
|
| APA | 4 |
| |
VIDEO MEMORY |
| Press INPUT repeatedly to | |||
DYNAMIC STANDARD LIVING |
| ||||
USER 1 | USER 2 | USER 3 |
|
| select the input you want to |
|
| OFF |
|
| project on the screen. |
MENU |
|
|
|
| Display the indication of the input you want. |
|
|
|
|
| |
|
|
|
|
| Example: To view the picture from the video |
ENTER |
| RESET |
|
| equipment connected to the VIDEO |
|
|
|
|
| INPUT jack. |
|
|
|
|
| VIDEO 1 |
|
|
|
|
| INPUT |
Video equipment | PJ MULTI | |||
equipped with S VIDEO |
| INPUT |
| |
connected to PJ MULTI |
|
|
| |
INPUT via the optional |
|
|
| |
signal interface cable or |
|
|
| |
the interface unit |
|
|
| |
“Memory Stick” | MS | AUDIO INPUT | ||
inserted into the |
|
|
| |
“Memory Stick” slot |
|
|
| |
* | Set the | menu | ||
| ||||
| according to the input signal. (1 page 20) |
|
| |
5 | Move the zoom lever to adjust |
| the size of the picture. |
Zoom lever
VOLUME |
+ |
– |
To turn off the power |
1Press the @/1 (on/standby) switch.
A message “Power OFF?” appears on the screen.
2Press the @/1 switch again.
The ON/STANDBY indicator flashes in green and the fan continues to run to reduce the internal heat. Also, the ON/STANDBY indicator flashes quickly during which you will not be able to light up the ON/STANDBY indicator with the @/1 switch.
3Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red.
You can turn off the projector by holding the @/1 (on/ standby) switch for about one second, instead of performing the above steps.
GB
14
Projecting the Picture on the Screen
Projecting the Picture on the Screen
15
GB
