Sony SUHS1, VPLHS1FP, RMPJHS1 service manual Indicators

VPL-HS1

Indicators
The LAMP/COVER or TEMP/FAN indicator on the control panel lights up or flashes if there is any trouble with
your projector.
		LAMP/	TEMP/	POWER	ON/
		COVER	FAN	SAVING	STANDBY
			TEMP/FAN Indicator
		LAMP/COVER Indicator
Indicator	Meaning and Remedy
LAMP/COVER flashes.	•	The lamp cover or the air filter cover is detached.

cAttach the cover securely (1 pages 38 and 39).

LAMP/COVER lights	•	The lamp has reached the end of its life.
up.		cReplace the lamp (1 page 38).
	•	The lamp becomes a high temperature.
		cWait for one minute to cool down the lamp and turn on the power again (1 page 15).
TEMP/FAN flashes.	•	The fan is broken.
		cConsult with qualified Sony personnel.
TEMP/FAN lights up.	•	The internal temperature is unusually high.
		cCheck to see if nothing is blocking the ventilation holes.
LAMP/COVER and	•	The electrical system breaks down.
TEMP/FAN light up.		cConsult with qualified Sony personnel.

	Warning Messages
	Use the list below to check the meaning of the messages displayed on the screen.
	Message	Meaning and Remedy
	High temp.!	•	Internal temperature is too high.
	Lamp off in 1 min.		cTurn off the power.
			cCheck to see if nothing is blocking the ventilation holes.
	Frequency is out of	•	This input signal cannot be projected as the frequency is out of the acceptable range of the
	range!		projector.
			cInput a signal that is within the range of the frequency.
		•	The resolution setting of the output signal of a computer is too high.
			cSet the setting of output to SVGA.
	Please check INPUT-A	•	You have input RGB signal from the computer when INPUT-A in the SET SETTING
	setting.		menu is set to COMPONENT or VIDEO GBR.
			cSet INPUT-A correctly (1 page 20).
	Please replace the	•	It is time to replace the lamp.
	LAMP.		cReplace the lamp (1 page 38).
Others	Please replace the filter.	•	It is time to replace the air filter.
			cReplace the air filter (1 page 39).

Caution Messages
Use the list below to check the meaning of the messages displayed on the screen.
Message	Meaning and Remedy
NO INPUT	•	No input signal
		cCheck connections (1 page 8).
Not applicable!	•	You have pressed the wrong button.
		cPress the appropriate button.
File error	•	In the sub menu for selecting the contents when using a “Memory Stick,” the presently
		selected contents name consists of more than 66 characters (“/” included).
		cReenter the name with less than 66 characters.
No MEMORY STICK	•	The “Memory Stick” is not correctly inserted.
		cCheck the “Memory Stick” and insert it correctly.

Caution displays while you are using the “Memory Stick” When the following display appears on the screen, you cannot use this “Memory Stick.” Use another one.

• The image data is the JPEG format but not DCF-compatible. Resolution of the image data is out of the acceptable range of the projector. (The projector accepts images with resolution of 5120 ◊ 4096 dots.)

There is the thumbnail but it is not DCF-compatible.

There is no selected image data.

There is the image data but no thumbnail.

There is the image data but the thumbnail is broken.

The image data is broken.

Others

1-19

GB

36

Troubleshooting

Troubleshooting

37

GB