DBATT (battery) indication Shows the battery condition.

For details, see “Power Supply” on page 20.

ECH (channel) indication

Shows the transmission channel. Each time you press the SET button, the channel indication changes as follows. For details, see “Settings” on page 28.

Transmission channel

Transmission

Press

frequency

the

 

SET

Attenuation

button.

 

level of the

 

input signal

 

Accumulated

 

battery use

 

time

 

5+ (+ selection) / – (– selection/ reset) buttons

Press these buttons to set the transmission channel, frequency, or attenuation level of the input signal. The “–” button resets the accumulated battery use time to “00:00”.

6SET button

Press to change display parameters. For details, see “Settings” on page 28.

Portable diversity tuner(URX-P1)1Antennas a/b

The angle of the antennas can be adjusted manually.

2MONITOR connector (3.5-mm diameter stereo mini jack)

To monitor the tuner output, connect the headphones to this connector.

3RF (radio frequency) indicator Indicates the strength of the RF input signal.

On in green: RF input is 15 dBµ* or more.

Off: RF input is less than 15 dBµ*.

......................................................................................................................................................................

* 0 dBµ = 1 µVEMF

15