Sony UWP-C1/C2, UWP-S1/S2, UWP-X1/X2 1POWER switch, 2Antennas a/b, tuner (URX-R1), 4MONITOR control, 6Display section, Half-racksize diversity, 3MONITOR connector (phone jack)

Half-rack size diversitytuner (URX-R1)

Front panel

Rear panel

1POWER switch

Turns the power of the tuner ON or OFF.

2Antennas a/b

The angle of the antennas can be adjusted manually.

3MONITOR connector (phone jack)

To monitor the tuner output, connect the headphones to this connector and adjust the monitor level with the MONITOR control. Use either stereo or monaural headphones.

4MONITOR control

Turn to adjust the output monitoring level (through the headphones).

5+ (+ selection) / – (– selection/ reset) buttons

Press these buttons to set the reception channel and frequency.

6Display section

A B

RF AF

CH

C

ARF (radio frequency) indications The number of dots indicates the RF input level.

BAF (audio frequency) indication Appears whenever the output audio signal is stronger than the reference level.

CGP (group)/CH (channel) indication

Shows the reception channel group and channel number. Each time you press the SET button, the channel indication changes as follows.

For details, see “Settings” on page 28.

17