Attachment and Installation Procedures
•The buttons and display on the front panel of the diversity tuner module (URX-M1) may be damaged if they are gripped too strongly. Always hold the diversity tuner module by the side.
•Do not put your fingers on the connectors on the rear panel of the diversity tuner module (URX-M1) or into the slot on the unit into which the diversity tuner module (URX- M1) will be installed.
•Keep the diversity tuner module (URX-M1) away from static electricity.
2 To install two or more diversity tuner modules (URX-M1) , detach the necessary number of blank panels by pressing the top and bottom tabs on each panel towards each other and pulling the panel out. Then do step 1 for each module.
Installing a diversity tuner module (URX-M1) into an MB- 806A Tuner Base Unit
The MB-806A Tuner Base Unit can accommodate up to 6 diversity tuner modules (URX-M1).
1 Holding both sides of the diversity tuner module (URX-M1), insert it into the slot.
Push it in until you hear a click.
Removing a diversity tuner module (URX-M1)
On the bottom panel of the MB-806A, locate the lever corresponding to the slot of the diversity tuner module (URX-M1) to be removed and pull the lever forward. The diversity tuner module (URX-M1) is ejected from the slot.
Lever
