Attachment and Installation Procedures

Removing the belt clip Insert a pointed object such as a ballpoint pen between the belt clip and the transmitter to make some space between them, and then remove the end of the belt clip from the hole on the side of the transmitter.

Attaching the supplied accessory to the hand-

held microphone (UTX-H1)

Attaching the microphone holder

Attaching the supplied accessories to the

portable diversity tuner (URX-P1)

Connecting the supplied conversion cable to the OUTPUT connector

Example: XLR-BMP conversion cable (supplied)

For a secure connection, be sure to turn and lock the connector cover.

Note

The supplied conversion cables are for use with the URX-P1 only. Attaching the cable to the audio input connector of the UTX-B1 may cause damage to the transmitter or the device connected to the transmitter.

Attaching the belt clip

See “Attaching the belt clip” on page 23.

Insert the bottom part of the microphone into the holder.

24