Manuals / Brands / Musical Instruments & Equipment / Microphone / Sony / Musical Instruments & Equipment / Microphone

Sony UWP-C1/C2, UWP-S1/S2, UWP-X1/X2 Appendix, Guidance on the use of a multi-channelsystem, Group for transmitter and tuner, Group, Wireless microphone system frequency list

1 48

Download 48 pages, 801.56 Kb

Appendix

Wireless microphone system frequency list

The following tables show the channels and frequencies selectable on your wireless microphone, transmitter and tuner.

The group 00 permits the unit to operate on any of 47 carrier frequencies in 125 kHz steps of TV channels 68 and 69.

For the setting procedures of the transmitting channels/frequencies on your unit, refer to the Instruction Manual of your unit. Be sure to save this list together with the Instruction Manual of your unit.

Guidance on the use of a multi-channel system

When building up a multi-channel system, Sony recommends that one of the groups listed under “Groups for the tuner” is selected to avoid mutual interference from other Sony wireless microphones/transmitters.

Group for transmitter and tuner

Group 00

TV-68

CH	MHz	CH	MHz
68-01	794.125	68-25	797.125
68-02	794.250	68-26	797.250
68-03	794.375	68-27	797.375
68-04	794.500	68-28	797.500
68-05	794.625	68-29	797.625
68-06	794.750	68-30	797.750
68-07	794.875	68-31	797.875
68-08	795.000	68-32	798.000
68-09	795.125	68-33	798.125
68-10	795.250	68-34	798.250
68-11	795.375	68-35	798.375
68-12	795.500	68-36	798.500
68-13	795.625	68-37	798.625
68-14	795.750	68-38	798.750
68-15	795.875	68-39	798.875
68-16	796.000	68-40	799.000
68-17	796.125	68-41	799.125
68-18	796.250	68-42	799.250
68-19	796.375	68-43	799.375
68-20	796.500	68-44	799.500
68-21	796.625	68-45	799.625
68-22	796.750	68-46	799.750
68-23	796.875	68-47	799.875
68-24	797.000

TV-69

CH	MHz	CH	MHz
69-01	800.125	69-25	803.125
69-02	800.250	69-26	803.250
69-03	800.375	69-27	803.375
69-04	800.500	69-28	803.500
69-05	800.625	69-29	803.625
69-06	800.750	69-30	803.750
69-07	800.875	69-31	803.875
69-08	801.000	69-32	804.000
69-09	801.125	69-33	804.125
69-10	801.250	69-34	804.250
69-11	801.375	69-35	804.375
69-12	801.500	69-36	804.500
69-13	801.625	69-37	804.625
69-14	801.750	69-38	804.750
69-15	801.875	69-39	804.875
69-16	802.000	69-40	805.000
69-17	802.125	69-41	805.125
69-18	802.250	69-42	805.250
69-19	802.375	69-43	805.375
69-20	802.500	69-44	805.500
69-21	802.625	69-45	805.625
69-22	802.750	69-46	805.750
69-23	802.875	69-47	805.875
69-24	803.000

45

Contents

UWP-C1/C2 UWP-S1/S2 UWP-X1/X2 Page Table of Contents ConfigurationConfigurationof the Packagesof the Packages Configuration of the Packages UWP-C1 Body-packtransmitter Portable diversity tuner UWP-C2 Hand-heldmicrophone (UTX-H1)(1) Configuration of the Packages UWP-S1 Half-racksize diversity tuner (URX-R1)(1) UWP-S2 UWP-X1 Diversity tuner module (URX-M1)(1) UWP-X2 Features UWP-C1 UWP-C2 UWP-S1 UWP-S2 UWP-X1 UWP-X2 Precautions Parts Identification Parts Identification 5+ (+ selection) / – (– selection/ reset) buttons 6Battery compartment Accommodates two LR6 (size AA) alkaline batteries 7SET button 8POWER switch 6SET button Portable diversity tuner (URX-P1) 1Antennas a/b 2MONITOR connector (3.5-mmdiameter stereo mini jack) RF (radio frequency) indications CBATT (battery) indication Shows the battery condition DGP (group)/CH (channel) indication 9OUTPUT (audio output) connector (3.5-mmdiameter stereo mini jack) Half-racksize diversity tuner (URX-R1) 1POWER switch 2Antennas a/b 3MONITOR connector (phone jack) 7RF (radio frequency) indicator Indicates the strength of the RF input signal 8SET button TUNER OUTPUT (audio output) connector (XLR type) 0LEVEL (audio output level) switch qs DC IN 9V (DC power input) connector 4+ (+ selection) / – (– selection/ reset) buttons Body-packtransmitter (UTX- B1)/portable diversity tuner (URX-P1) Battery indication Notes on batteries Attachment and Installation Procedures Attaching the microphone Attaching the holder clip to the microphone Attaching the wind screen to the microphone Attaching the belt clip Attaching the microphone holder Connecting the supplied conversion cable to the OUTPUT connector Attaching the shoe mount adapter stand adapter Installing a diversity tuner module (URX-M1)into an MB- 806A Tuner Base Unit Installing a diversity tuner module (URX-M1)into an SRP-X700PPowered Mixer Settings Setting the reception channel The procedure below is the same for all UWP series tuners (URX-P1/R1/M1) To selct the channel by frequency indication Setting the attenuation level of the audio input Do the following while there is no signal transmission Do the following while there is signal transmission Resetting the accumulated battery use time indication For transmitters (UTX-B1/H1) 1-b For the portable diversity tuner (URX-P1) Setting the monitor level (portable diversity tuner (URX-P1)only) Operation If noise is heard System Configurations System Configurations Sample configurations for AV presentations Sample configuration of a PA system Error Messages Troubleshooting Troubleshooting Specifications Items common to all transmitters Body-packtransmitter (UTX-B1) Items common to all tuners Portable diversity tuner (URX-P1) Half-racksize diversity tuner (URX-R1) Diversity tuner module (URX- M1) Appendix Guidance on the use of a multi-channelsystem Group for transmitter and tuner Groups for tuner AC adapter for use with the URX-R1 •Specifications •The size of the DC output connector (DC jack)