See “Wireless microphone system frequency list” on page 45 for details on the selectable channel groups and channels.
1 Press down the SET button for more than one second.
Keep pressing the SET button until the display section parameters start to flash.
2 Press the SET button repeatedly until the channel group and the channel number indications appear.
The channel group indication starts to flash.
3 Press the + or – button to select the channel group.
Pressing the + button cycles the indication in the order shown in the tables in “Wireless microphone system frequency list” on page 45.
Pressing the – button cycles the indications in the opposite direction.
Hold down the + or – button to change the channel group faster.
4 When the desired channel group number appears, press the SET button.
The selected group is entered. The right four digits start to flash to allow the selection of the channel number.
5 Press the + or – button to select the channel number.
The channel indication changes in the order shown in the tables in “Wireless microphone system frequency list” on page 45.
Example: When the channel group 00 is selected
6 When the desired channel number appears, leave the tuner for about 10 seconds until the selected channel number stops flashing and the selection is stored in memory.
29