Sony UWP-C1/C2, UWP-S1/S2, UWP-X1/X2 (URX-M1), 8SET button, 1SET button, 3Display section, Parts Identification, Diversity tuner module, 0LEVEL (audio output level) switch

Parts Identification

Reception
channel	Press
group and
	the
number
	SET
Reception	button.
frequency

7RF (radio frequency) indicator Indicates the strength of the RF input signal.

On in green: RF input is 25 dBµ* or more.

Off: RF input is less than 25 dBµ*.

8SET button

Press to change display parameters. For details, see “Settings” on page 28.

9TUNER OUTPUT (audio output) connector (XLR type) Connect to the audio input connector of a mixer or amplifier, etc.

0LEVEL (audio output level) switch

Sets the output level of the TUNER OUTPUT connector (XLR type) to –28 dBm or –58 dBm.

Select the setting according to the input level of the equipment connected to the tuner.

qa TRS PHONE (tuner audio output) connector (1/4-inch jack) Connect to the audio input connector of a mixer or amplifier, etc. The output level from this connector is –30 dBm.

qs DC IN 9V (DC power input) connector

Connect the supplied AC adapter here.

Diversity tuner module(URX-M1)1SET button

Press to change display parameters. For details, see “Settings” on page 28.

2RF (radio frequency) indicator Indicates the strength of the RF input signal.

On in green: RF input is 25 dBµ* or more.

Off: RF input is less than 25 dBµ*.

3Display section

A B

RF AF

CH

C

......................................................................................................................................................................

* 0 dBµ = 1 µVEMF

18