Disconnecting the product

Note

When disconnecting the product from the personal computer, confirm that the connected devices can be disconnected safely.

1Exit the software being used by the USB device connected to the product.

2Disconnect the USB connector connected to the personal computer.

If a USB HDD or USB memory is connected

1Click “Safely Remove Hardware” on the taskbar.

The “Safely Remove Hardware” screen will appear.

2After selecting “USB Mass Storage Device” in the “Safely Remove Hardware” screen, click “Stop.”

The “Stop a Hardware device” screen will appear.

3Select the “USB Mass Storage Device” connected to the product, then click “OK.”

The “Safe To Remove Hardware” screen will appear.

4Click “OK.”

Prepared for disconnection.

5After the POWER lamp or Access lamp of the connected product turns off, disconnect the product.

GB