Restrictions
When a personal computer is connected, a maximum of two screens can be displayed, including the LCD of the personal computer.
Do not use the product in the following ways:
–Simultaneous usage of the MONITOR and
–Simultaneous usage of the product’s display output and the personal computer’s exterior display output.
The LAN connector of this product does not support Network boot or
Depending on the instant mode, types of software or data, etc., the sound may not output from the HEADPHONES connector.
The product does not support Windows Aero. If the product is connected to a personal computer, it will change to the basic user interface.
When a display is connected to the product, the extended desktop mode will be set as the default setting. Use in clone mode (mirror mode) is not supported.
When multiple USB devices are connected, as a characteristic of the USB, CPU load of the personal computer may increase, resulting in a decrease in software speed or printing speed of the USB printer.
Playback of movies on the external display is not supported. It is not supported even if the display is connected as the primary monitor.
Movie playback and software that requires 3D processing are not supported on the display connected to this product.
The maximum bit and sampling rate of the headphones output is 16 bits, 48 KHz.
When starting or restoring Windows, a sound to notify the device connection/disconnection may sound. This is not a malfunction. To stop the sound, perform the following procedure.
However, be aware that all other sound effects that notify the detection of other devices will turn off as well.
1Click the 
The “Control Panel” screen appears.
2Click “Hardware and Sound,” then click “Manage audio devices” in the “Sound” screen.
The “Sound” screen appears.
3Click the “Sounds” tab, then select “Device Connect” from the “Program” list.
4Select “None” from the “Sounds” drop down list.
5Also select “Device Disconnect” from the “Program” list, then select “None” from the “Sounds” drop down list.
6Click “OK,” then close the “Sound” screen.
The setting change is complete, and the sound to notify device connection/ disconnection is turned off.