Connecting headphones

You can connect headphones to the HEADPHONES connector on this product.

About volume

Depending on sound effects, sound sources, software types, etc., the volume of the sound may differ although the volume setting is the same. Change the sound settings of your personal computer according to your usage environment.

When you want to change the sound level in the sound settings of each device, double click the appropriate device, or select and display the properties of the device. For more information on sound settings, refer to the instruction manual or the online manual of your personal computer.

Notes

When connecting/disconnecting this product to/from a personal computer, the output setting from the personal computer changes. While the product is connected to a personal computer, the sound of the personal computer will be output through the HEADPHONES connector on this product.

Depending on the software, the sound may not be output through the HEADPHONES connector on this product. In this case, exit the software, and then follow the procedure below to allow the sound to be output from the headphones of the connected personal computer, etc.

1Right-click the icon on the taskbar, then select the playback device.

The “Sound” screen appears.

2From the displayed playback device, select speakers or headphones of the personal computer, then click “Set Default.”

This product is identified as “Speakers C-Media….”

3Click “OK.”

Setting is complete and the sound will output from the personal computer.

Connecting the microphone

You can use the microphone by connecting it to the MIC connector of this product.

Note

While the product is connected to a personal computer, the settings may change to activate the MIC connector of this product. To activate the microphone connector of the personal computer, follow the procedure below.

1Right-click the icon on the taskbar, then select the recording device.

The “Sound” screen appears.

2From the displayed recording devices, select a device other than “Microphone C-Media…,” and click “Set Default.”

3Click “OK.”

The setting change is complete, and the microphone connector of the personal computer will activate.

The microphone volume of this product may be set to mute. In this case, change the volume level according to your preference.

1Right-click the icon on the taskbar, then select the recording device.

The “Sound” screen appears.

2From the displayed recording device, select “Microphone C-Media…,” and click “Properties.”

“Microphone Properties” appears.

3Select the “Levels” tab and set the microphone volume according to your microphone.

12 GB