Sony VPL-HS3 15 GB, 5,7, 5,8, and Connections Preparations, 1 Plug the AC power cord into a wall outlet, 3 Turn on the equipment connected to the projector

5,75,8

Rear remote control detector

Ajuster lock lever

Front remote control detector

			4
LIGHT	INPUT		2
DYNAMIC	STANDARD	CINEMA
PICTURE MODE
USER 1	USER 2	USER 3
	ENTER		M/m/</,/
			ENTER buttons
APA	DDE	MENU
WIDE MODE	MUTING	RESET	RESET button
VOLUME SIDE SHOT			7
+		+
–		–

Tip

The ? / 1 (on/standby), INPUT, MENU, and M/m/</,/ ENTER (joystick) buttons on the side panel of the projector have the same functions as those on the remote control.

1 Plug the AC power cord into a wall outlet.

The ON/STANDBY indicator lights in red and the projector goes into standby mode.

ON/	Lights in red.
STANDBY

2 Press the [/1 (on/standby) switch to turn on the projector.

The ON/STANDBY indicator lights in green.

ON/	Lights in green.
STANDBY

3 Turn on the equipment connected to the projector.

Refer to the operating instructions of the connected equipment.

4 Press INPUT to project the picture on the screen.

Each time you press the button, the input indication changes. (1 page 23)

Video 1

NTSC 3.58

INPUT

and Connections Preparations

Step 3: Adjusting the Picture Size and Position 15 GB