Sony VPL-HS3 manual 39

Specifications

System

Projection system
	3 LCD panels, 1 lens, projection
	system
LCD panel	0.62-inch TFT LCD panel, 1,245,816
	pixels (415,272 pixels × 3)
Lens	1.2 times zoom lens (manual)
	f15.7–20mm/F.2.0–2.3
Lamp	150 W UHP type
Projection picture size
	Range: 40 to 150 inches (measured
	diagonally)
Color system	NTSC3.58/PAL/SECAM/NTSC4.43/
	PAL-M/PAL-N system, switched
	automatically/manually
Acceptable video signals
	15 kHz RGB/component 50/60 Hz,
	Progressive component 50/60 Hz,
	DTV (480/60i, 575/50i, 480/60p,
	575/50p, 720/60p, 720/50p, 1080/
	60i, 1080/50i), 1080/24PsF,
	Composite video, Y/C video
Acceptable computer signals
	fH: 19 to 72 kHz
	fV: 48 to 92 Hz
	Maximum resolution XGA 1024 ⋅
	768, fV: 85 Hz
	1280 × 720, fV:60 Hz
Speaker	Monaural speaker system, 33 mm
	(1 5/16 inches) diameter,
	max. 2 W ⋅ 1

Input

Video input	VIDEO: phono type
	Composite video: 1 Vp-p±2 dB
	sync negative (75 ohms terminated)
	S VIDEO: Y/C, mini DIN 4-pin type
	(male)
	Y (luminance): 1 Vp-p±2 dB sync
	negative (75 ohms terminated)
	C (chrominance): burst 0.286 Vp-p
	±2 dB (NTSC)
	(75 ohms terminated)
	burst 0.3 Vp-p±2 dB (PAL)
	(75 ohms terminated)
Audio input	AUDIO: stereo phono type 500
	mVrms, impedance more than 47
	kilohms
HDMI	Video: Digital RGB/YCB (PB) CR (PR)

Audio: Digital

PJ MULTI INPUT 32-pin multi connector

	Composite video: 1 Vp-p±2 dB sync
	negative (75 ohms terminated)
	S video: Y/C
	Y (luminance): 1 Vp-p±2 dB sync
	negative (75 ohms terminated)
	C (chrominance): burst 0.286
	Vp-p±2 dB (NTSC) (75 ohms
	terminated)
	burst 0.3 Vp-p±2 dB (PAL) (75
	ohms terminated)
	Analog RGB/component:
	R/CR (PR): 0.7 Vp-p±2 dB
	(75 ohms terminated)
	G: 0.7 Vp-p±2 dB
	(75 ohms terminated)
	G with sync/Y: 1 Vp-p±2 dB sync
	negative (75 ohms terminated)
	B/CB (PB): 0.7 Vp-p±2 dB
	(75 ohms terminated)
	SYNC/HD: Composite sync input:
	1–5 Vp-p high impedance, positive/
	negative
	Horizontal sync input: 1–5 Vp-p
	high impedance, positive/negative
	VD: Vertical sync input: 1–5
	Vp-p high impedance, positive/
	negative
General
Dimensions	304 ⋅ 168 ⋅ 321 mm
	(12 ⋅ 6 5/8 ⋅ 12 3/4 inches) (w/h/d)
Mass	Approx. 4.5 kg (9 lb 15 oz)

Power requirements

AC 100 to 240 V, 2.1–1.1 A, 50/60 Hz

Power consumption

Max. 200 W (Standby mode: 3 W)

Operating temperature

0ºC to 35ºC (32ºF to 95ºF)

Operating humidity

35% to 85% (no condensation) Storage temperature

–20ºC to 60ºC (–4ºF to 140ºF)

Storage humidity 10% to 90% Supplied accessories

Remote control RM-PJHS2 (1) Size AA (R6) batteries (2) Signal interface cable SIC-HS40

(5 m) (1) Adjuster spacers (2) AC power cord (1)

Air filter (for replacement) (1) Operating Instructions (1)

Design and specifications are subject to change without notice.

Others

Specifications 39 GB