Sony VPL-HS3 Projecting, 6 Turn the FOCUS ring to adjust the focus, 7 Press VOLUME + or – to adjust the volume, 3 Turn on the equipment connected to the projector

2 Press the [/1 (on/standby) switch to turn on the projector.

The ON/STANDBY indicator lights in green.

ON/	Lights in green.
STANDBY

3 Turn on the equipment connected to the projector.

Refer to the operating instructions of the connected equipment.

4 Press INPUT repeatedly to select the input you want to project on the screen.

Display the indication of the input you want.

Example: To view the picture from the video equipment connected to the VIDEO INPUT jack.

Video 1

NTSC 3.58

INPUT

To view the picture from	Press INPUT to
	display
Video equipment connected to	Video 1
VIDEO INPUT on the projector
Video equipment connected to S	S-Video 1
VIDEO INPUT on the projector
RGB/component equipment	Input-A*
connected to PJ MULTI INPUT via
the optional signal interface cable or
the interface unit
Video equipment connected to PJ	Video 2
MULTI INPUT via the optional signal
interface cable or the interface unit
Video equipment equipped with S	S-Video 2
VIDEO connected to PJ MULTI
INPUT via the optional signal
interface cable or the interface unit
Equipment connected to HDMI	HDMI
INPUT on the projector

*Set the “Input-A Signal Sel.” setting in the SET SETTING menu according to the input signal. (1 page 31)

5 Turn the ZOOM ring to adjust the size of the picture.

ZOOM ring

6 Turn the FOCUS ring to adjust the focus.

Adjust to obtain sharp focus.

FOCUS ring

7 Press VOLUME + or – to adjust the volume.

VOLUME

Projecting

Projecting the Picture on the Screen 23 GB