Sony VPL-HS3 ring, FOCUS ring, and adjust the, picture size using the ZOOM, 5 Adjust the focus using the

andConnections Preparations
	5 Adjust the focus using the
	FOCUS ring, and adjust the
	picture size using the ZOOM
	ring.

ZOOM ring FOCUS ring

until the adjuster clicks into the round hole in the lower side at the rear of the projector with a click.

Round hole

Adjusting the picture position using the supplied adjuster spacer

Attaching one of the supplied spacers for adjuster adjustment (spacers for 1º and 2°) allows you to tilt the projector to the right or left at a tilting angle up to 2º.

6 Adjust the position of the picture to fit the screen using the adjuster.

Adjusting the picture position using the adjuster

Hold down and slide the adjuster lock lever to the right, move the projector, then return the lock lever.

Adjuster lock lever

You can move the projector horizontally or vertically within the following ranges:

Up to 30° each	Up to 10° each way
	vertically
way horizontally

To reset the projector to the center position of the adjuster

Hold down and slide the adjuster lock lever to the right, move the projector, then return the lock lever

Adjuster spacer (supplied)

Adjuster spacer (supplied)

To attach the supplied adjuster spacer

1Place a thick cloth (e.g., a cushion) beneath the projector. Place the projector face down.

2While pressing the lock knobs inward, remove the adjuster bar at the bottom of the adjuster table to which you want to attach the supplied spacer.

3Fit the spacer into the removed adjuster bar spot.

GB 16 Step 3: Adjusting the Picture Size and Position