Sound

No sound.

c Check that connecting cables are

 

properly connected. (1 page 9)

 

c Adjust “Volume” in the

 

 

PICTURE SETTING

menu

 

(1 page 29), or press

 

 

VOLUME + on the remote

 

control.

 

 

 

c Press MUTING on the remote

 

control.

 

 

 

 

 

 

On-screen display

 

 

 

On-screen display does

c Set “Status” in the MENU

 

not appear.

SETTING

menu to “On.”

 

(1 page 31)

 

 

 

 

 

 

Remote control

 

 

 

The remote control

c Batteries could be weak.

 

does not work.

Replace with new batteries. (1

 

page 5)

 

 

cInsert the batteries with correct polarities. (1 page 5)

Indicators

The LAMP/COVER or TEMP/FAN indicator on the control panel lights up or flashes if there is any trouble with your projector.

LAMP/COVER Indicator

TEMP/FAN Indicator

LAMP/

TEMP/

POWER

ON/

COVER

FAN

SAVING

STANDBY

LAMP/COVER

c Attach the lamp cover or the air filter

flashes.

cover securely. (1 pages 36 and 38)

 

 

LAMP/COVER

c The lamp has reached the end of its

lights up.

life. Replace the lamp. (1 page 36)

 

c The lamp becomes a high temperature.

 

Wait for one minute to cool down the

 

lamp and turn on the power again. (1

 

page 24)

 

 

TEMP/FAN

c The fan is broken. Consult with

flashes.

qualified Sony personnel.

 

 

TEMP/FAN

c The internal temperature is unusually

lights up.

high. Check to see if nothing is

 

blocking the ventilation holes.

 

c Check to see whether or not the

 

projector is being used at high

 

altitudes.

 

 

LAMP/COVER

c The electrical system breaks down.

and TEMP/FAN

Consult with qualified Sony

light up.

personnel.

 

 

 

Warning Messages

Use the list below to check the meaning of the messages displayed on the screen.

High temp.!

c Turn off the power.

Lamp off in 1

c Check to see if nothing is blocking the

min.

ventilation holes.

 

 

 

Frequency is

c Input a signal that is within the

out of range!

acceptable range of the frequency.

 

c Set the output signal on an external

 

monitor of the connected computer to

 

SVGA.

 

 

c Set “Input-A Signal Sel.” in the SET

 

SETTING

menu to “Computer.”

 

 

Please check

c Set “Input-A Signal Sel.” in the SET

Input-A Signal

SETTING

menu to “Computer”

Sel.

when RGB signal is input from the

 

 

computer. (1 page 31)

 

 

Please replace

c It is time to replace the lamp. Replace

the LAMP.

the lamp. (1 page 36)

 

 

Please replace

c It is time to replace the air filter. Replace

the filter.

the air filter. (1 page 38)

 

 

Iris unit doesn’t

c The iris is damaged.

work.

c Consult with qualified Sony personnel.

 

 

 

Caution Messages

Use the list below to check the meaning of the messages displayed on the screen.

c No signal is input in the selected input. Check connections.

Not applicable! c Press the appropriate button.

Others

Troubleshooting 35 GB