Sony VPL-HS3 manual 30

	Item	Description
	Black Level	Emphasizes black color to produce a
	Adj (Adjust)	bolder “dynamic” picture. Set according
		to the input signal source.
		High: Gives higher emphasis to the black
			color.
		Low: Gives lower emphasis to the black
			color.
		Off: Cancels this feature.
	Gamma Mode	Graphics: Reproduces the photos in
			natural tones.
		Text: Contrasts black and white. Suitable
			for images that contain lots of text.
	Color Temp.	High: Gives the white colors a blue tint.
		Middle: Gives the white colors a neutral
			tint.
		Low: Gives the white colors a red tint.
	DDE	Off: Plays a video signal in an interlace
	(Dynamic		format without converting.
	Detail	Progressive: Converts an interlace format
	Enhancer)		video signal to a progressive format.
Using		Film: Normally, select this option.
			When the video signal with a format
			Reproduces the 2-3 Pull-Down film
			sources with smooth picture movement.
the			other than the 2-3 Pull-Down is input,
			“Progressive” is automatically selected.
Menus
	Cinema	Iris Control
	Black Pro	Switches the iris function during
		projection.
		Off: Normal contrast.
		On: Enhances the black by emphasizing
			the contrast.
		Lamp Control
		Switches the lamp wattage during
		projection.
		High: Normal wattage.
		Low: Enhances the black by reducing the
			lamp wattage.
		Tip
		If “Lamp Control” is set to “Low,” the next time
		the power is turned on, the lamp will use the
		“High” setting initially, and then go to “Low."
	INPUT SETTING
	Item		Description
	Adjust Signal…
	Dot Phase		Adjusts the picture from a computer for
			clearer picture after it is adjusted by
			pressing the APA button.
	H Size		Adjusts the horizontal size of the picture
			from a computer. The higher the setting,
			the wider the picture. The lower the
			setting, the narrower the picture.

Item	Description
Shift	As the setting for H (horizontal)
	increases, the picture moves to the right,
	and as the setting decreases, the picture
	moves to the left. Use < or , to adjust
	the horizontal position.
	As the setting for V (vertical) increases,
	the picture moves up, and as the setting
	decreases, the picture moves down. Use
	M or m to adjust the vertical position.
Wide Mode	You can select the 4:3 aspect ratio picture
	mode, “Normal” and “Normal Through,”
	and 16:9 aspect ratio picture mode,
	“Full,” “Wide Zoom,” “Zoom,” “Subtitle”
	and “Full Through.”
	Full: The 16:9 squeezed* picture is
	diplayed with the correct aspect. The
	4:3 picture is enlarged horizontally to
	fit the 16:9 screen.
	* squeezed: An original 16:9 aspect
	ratio picture is recorded horizontally
	compressed to be a 4:3 picture.
	Normal: The picture with normal 4:3
	aspect ratio is displayed to fill the
	vertical screen size.
	Wide Zoom: The picture with 4:3 aspect
	ratio is enlarged and the upper and
	lower portions of the picture are
	compressed to fit the 16:9 screen. Use
	this mode to view news, variety shows,
	etc.
	Zoom: The normal 4:3 aspect ratio
	picture is enlarged verticall and
	horizontally at the equal ratio to fill the
	16:9 screen. The mode is ideal for
	viewing a wide-format movie.
	Subtitle: The subtitle area is compressed
	and displayed at the lower part of the
	screen. Use this mode to view a movie
	with the subtitle.
	Full Through: One-to-one mapping is
	done on a squeezed 16:9 picture. It is
	displayed in the center of the screen.
	Normal Through: One-to-one mapping
	is done on the picture with 4:3 aspect
	ratio. It is displayed in the center of the
	screen.
	Note
	If “Full Through” or “Normal Through” is
	selected when a video (50 Hz) or progressive
	video (50p) signal is input, the picture may not
	be completely displayed on the screen due to the
	number of dots of the LCD panel.
	For details, see “Selecting the Wide
	Screen Mode” on page 24.

GB 30 Menu Lists