Near a heat or smoke sensor

Malfunction of the sensor may be caused.

Very dusty and extremely smoky

Do not use the projector under the following conditions:

Tilting the unit extremely

Blocking the ventilation holes

Ventilation

Ventilation

holes

holes

(exhaust)

(intake)

Tip

For further details on the location of the ventilation holes (intake or exhaust), see “Location of Controls” on pages 45 and 46.

Placing the projector without the adjuster

Placing the projector upside down

Do not place the projector upside down on the table etc. The projector will be unstable.

Note

Installing the unit at altitudes

When using the projector at an altitude of 1,500 m or higher, turn on high altitude mode in the INSTALL SETTING menu. Failing to set this mode when using the projector at high altitudes could have adverse effects, such as reducing the reliability of certain components.

and Connections Preparations

Step 1: Installing the Projector

7 GB