6While pushing the projector cover toward you by holding both sides of the cover on the lens side, close the cover until it clicks.

2

1

7Connect the power cord and set the projector to standby mode.

8Press the following buttons on the remote control in the following order for less than five seconds each: RESET, <, ,, ENTER.

Notes

•Do not put your hands into the lamp replacement spot, and do not allow any liquid or object to fall into it to avoid electrical shock or fire.

•Be sure to use the LMP-H150 Projector Lamp for replacement. If you use lamps other than LMP-H150, a malfunction may occur.

•Be sure to turn off the projector and unplug the power cord before replacing the lamp.

Disposal the used lamp

The used lamp contains Mercury, dispose according to local, state or federal laws.

As the materials used in this lamp are similar to those of a fluorescent lamp, you should dispose of a used projector lamp in the same way as a fluorescent lamp.

Others

Replacing the Lamp 37 GB