Projecting

Cutting off the sound

Press MUTING on the remote control.

To restore the sound, press MUTING again.

To turn off the power

1Press the [/1 (on/standby) switch.

A message “POWER OFF?” appears on the screen.

2Press the [/1 switch again.

The ON/STANDBY indicator flashes in green and the fan continues to run to reduce the internal heat. Also, the ON/STANDBY indicator flashes quickly during which you will not be able to light up the ON/STANDBY indicator with the [/1 switch.

3Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red.

You can turn off the projector by holding the [/1 (on/ standby) switch for about one second, instead of performing the above steps.

Selecting the

Wide Screen

Mode

You can enjoy various wide screen mode according to the video signal received. You can also select it using the menu. (1 page 30)

LIGHT

INPUT

 

DYNAMIC

STANDARD

CINEMA

 

PICTURE MODE

 

USER 1

USER 2

USER 3

ENTER

APA DDE MENU

WIDE MODE button

WIDE MODE MUTING RESET

VOLUME SIDE SHOT

+ +

– –

Press WIDE MODE.

Each time you press the button, you can select the “Wide Mode” setting.

GB 24 Selecting the Wide Screen Mode