Source Technologies ST9530

Secure MICR Printer User’s Guide © Source Technologies

Resource Storage

Check-related resources, such as form overlays and signatures, are stored in your printer

with unique identification numbers. ID numbers must be less than 32767. Number 5001 is

reserved for the Audit Trail overlay. Your Secure MICR Printer has two areas where you

may store these resources: FLASH and RAM Memory.

Flash Memory is an optional feature. It is user managed and resources can be designated

as “secure” or “unsecure.” Secure resources are loaded to flash with the STL command

and have ID numbers greater than or equal to 10000. They can only be accessed by using

the STP command when the printer is in MICR mode. Unsecure resources do not require a

password and should be assigned an ID number less than 10000. Resources stored in

flash memory are not deleted when the printer is powered off. Flash memory is required for

all Audit Trail features.

Storing resources in RAM is also an option. Resources in RAM are deleted when the

printer is powered off or reset. For this reason check-related resources may need to be

loaded frequently. Resources stored in RAM cannot be password protected.

We recommend storing all check-related resources in secured flash memory.

MICR Menu

Your Secure MICR Printer contains a front panel menu specific to MICR applications. The

complete menu is as follows:

Option Card Menu > MICR Menu

Security Lock

Audit Menu

Audit Location - Flash/Disk

Record Sorting

Overlay

Sum Field 4

Print Report

Setup Menu

MICR Type - Normal/Optraforms

Hex Transfer

Density Control

MICRpoint

Use the menu button on the front of your printer to toggle through the menu options. To

select an option press the select (√) button. An item is selected when it has an asterisk (*)

after it.