FAN: CPU Cooling Fan Connector
This 3-pins connector provides 12V power for the CPU cooling fan which matches the pin assignment of this connector. If you enable the Suspend Mode function in BIOS setup, this fan will stop when the system is into the suspend mode.
CPU Cooling Fan
Connector
(Pin Assignment)
Note: Make sure the pin assignment of our CPU Cooling Fan is matched
with this connector before connecting it, otherwise, you may
damage either the mainboard or the cooling fan.
JP44 – Wake-On-LAN (WOL) Header
Attach a 3-pin connector from the LAN card which supports the Wake- On-LAN (WOL) function. This function lets users wake up the connected computer through the LAN card. (The cable should be included with the LAN card.)
JP44 Pin Assignment
1 5V
2 GND
3 SENSOR
