SOYO 6KB82440 manual Load Setup Defaults, Pci Irq, Pci Ide Irq, Int#

30 BIOS Setup

IRQX and Choose PCI/ISA PnP or Legacy ISA. If the first DMAX assigned item is set to Manual, you could choose IRQX

to	and DMAX assigned to PCI/ISA PnP card or ISA
	card.
	PCI/ISA PnP: BIOS auto assigns IRQ/DMA to
	the device.
	Legacy ISA: User assigns IRQ/DMA to the
	device.
PCI IRQ	Choose Edge or Level. Most PCI trigger signals
Activated By	are Level. This setting must match the PCI card.
PCI IDE IRQ	Select PCI-AUTO, ISA, or assign a PCI SLOT
Map To	number (depending on which slot the PCI IDE is
	inserted). The default setting is PCI-AUTO. If
	PCI-AUTO does not work, then assign an
	individual PCI SLOT number.
Primary IDE	Choose INTA#, INTB#, INTC#, or INTD#. The
INT#	default setting is INTA#.
Secondary IDE	Choose INTA#, INTB#, INTC#, or INTD#. The
INT#	default setting is INTB#.

3.After you have finished with the PCI Slot Configuration, press the <ESC> key and follow the screen instructions to save or disregard your settings.

Load Setup Defaults

This item loads the system values you have previously saved. Choose this item and the following message appears:

ÒLoad SETUP Defaults (Y/N)? NÓ

To use the SETUP defaults, change the prompt to ÒYÓ and press <Enter>.

Note: The SETUP Defaults are optimized for the most stabilized performance.