SOYO 6KB82440 manual Boot Sequence, Swap Floppy, Drive, Boot Up Num, Lock Status, Gate A20, Option

22	BIOS Setup
Boot Sequence	Choose the boot device sequence as your need. For
	example, ÒA, C, SCSIÓ means that BIOS will look
	for an operating system first from drive A, drive C,
	then SCSI device. Options of this function are:
	A, C, SCSI;
	C,A, SCSI;
	C, CD-ROM, A;
	CD-ROM, C, A;
	D, A, SCSI;
	E, A, SCSI;
	F, A, SCSI;
	SCSI, A, C;
	SCSI, C, A;
	C only;
	LS120, C.
Swap Floppy	Enabled changes the sequence of the A: and B:
Drive	drives. (The Default setting is Disabled.)
Boot Up Num	Choose On or Off. On puts numeric keypad in Num
Lock Status	Lock mode at boot-up. Off puts this keypad in arrow
	key mode at boot-up.
Gate A20	Choose Fast (default) o Normal. Fast allows RAM
Option	accesses above 1MB using the fast gate A20 line.

Typematic Rate Enable this option to adjust the keystroke repeat rate.

Setting

Typematic Rate Choose the rate a character keeps repeating.

(Chars/Sec)

Typematic Choose how long after you press a key that a Delay (Msec) character begins repeating.

Security Option Choose Setup or System. Use this feature to prevent unauthorized system boot-up or use of BIOS Setup.

ÒSystemÓ Ð Each time the system is booted the password prompt appears.

ÒSetupÓÐ If a password is set, the password prompt only appears if you attempt to enter the Setup program.